Interface Force - Multi-axis force sensors (load cells), Pressure Sensor & Pressure Transmitters, Sensor Instrumentation, Custom Designs and Dynamic Pressure Mapping.

Use our live chat service to speak to an operator directly

Multi Axis, Torque & Force Products

1216 Axial-Torsion - Axial Torsion Load Cell

1216 Axial-Torsion

Axial Torsion Load Cell

The 1216 Axial-Torsion load cell measure both force and torsion in the same cell - with either channel capable of being used independently, each channel offers excellent performance and minimal crosstalk.

View product

1516 Axial-Torsion - Axial-Torsion Load Cell

1516 Axial-Torsion

Axial-Torsion Load Cell

The 1516 is a low profile load cell designed for applications where axial and torsion loads need too be measured simultaneously 

View product

2816 Multi-Axis - Flange style multi-axis load cell

2816 Multi-Axis

Flange style multi-axis load cell

The 2816 is the high capacity version of the 1216/1516 for measuring Axial load and Torsion with minimum crosstalk. This unit provides high outputs on both outputs making it very suitable for cyclic applications with large numbers of cycles. The flange style coupling provides a robust method of load attachment and ease of alignment in complex loading systems.

Custom versions have been produced with outputs for Thrust (Z), X-Moment, Y-Moment and Torsion (T) for specialised applications e.g. testing of composite components.

View product

3A, 3 Axis Load Cell - 3 Axis Load Cell

3A, 3 Axis Load Cell

3 Axis Load Cell

The Interface A3, 3 axis load cell measures force simultaneously in three mutually perpendicular axes: X, Y and Z.  This makes it ideal for many industrial and scientific applications, such as robotics, aerospace, automotive, biomechanical and medical research

Each axis supplies an output of 1mV/V and does not require mathematical manipulation. The A3 load cell is built to minimize eccentric loading and cross talk between channels.

The A3 is available in a wide range of capacities from just 10Ns and in five different physical sizes. However, if the standard range does not meet your needs we are happy to work with you on a custom design 

View product

5200 Multi-Axis - 5200 Multi-Axis

5200 Multi-Axis

5200 Multi-Axis

Built on the 1200 series Precision design these units have additional outputs for X & Y Moments making it possible to monitor off-axis loads for information about alignment accuracy. The standard 'thrust' output has the accuracy and performance of the 1200 series units making this unit very suitable for calibration applications.

New European proposals have been suggested to introduce off-axis load monitoring into current Standards such as ISO-7500/1 and ISO-376.

View product

5600 Axial Torsion - Axial Force Torque Transducer

5600 Axial Torsion

Axial Force Torque Transducer

The 5600 Axial Torsion force and torque transducer is capable of simultaneous force and torque measurements. 

This axial - torsion device offers high performance and accuracy with low cross talk, high stiffness and high resistance to extraneous loads  

View product

6A 6 Axis Load Cell - Multi Axis Load Cell

6A 6 Axis Load Cell

Multi Axis Load Cell

The Interface 6A series of load cells feature six independent, temperature compensated bridges providing mV/V output to six independent channels. This enables measurement in three perpendicular axis with three simultaneous torque measurements about those axis.

The 6A series is available in 5 different sizes to meet you requirements, most with IP67 enviromental sealing.  

Typical applications include

  • Orthopaedic and bio-mechanical research
  • Robotics
  • Aerospace reasearch
  • Automotive testing
  • Wind tunnel test models

View product

AT101 Axial Torsion 0.5kN/5Nm - Low Capacity Force and Torque

AT101 Axial Torsion 0.5kN/5Nm

Low Capacity Force and Torque

The AT101 is a axial torsion transducer capable of measuring both torque and force in a single device.  The AT101 offers high accuracy measurement with low cross talk and a safe overload capacity of 150%  

View product

AT102 Axial Torsion 10kN/10Nm - Force & Torque Sensor

AT102 Axial Torsion 10kN/10Nm

Force & Torque Sensor

The AT102 is a  axial torsion transducer for the measurement of both force and torque in a single device. 

The compact design featuring integral side exit cables makes it ideal for many applications including rheometry testing machines used in rubber testing

View product

AT103 Axial Torsion 20kN/20Nm - Force and Torque Transducer

AT103 Axial Torsion 20kN/20Nm

Force and Torque Transducer

The AT103 load cell offers both force and torque measurement in one compact package. The two bottom exit integral cables enable easy installation.

 

View product

TQ2 Axial Torsion - Axial Torsion Force Transducer

TQ2 Axial Torsion

Axial Torsion Force Transducer

The TQ2 is a force transducer capable of measuring both force in either tension or compression (Fz) while simultaneously measuring the moments around those forces (Mz).  

View product

TQ7 Axial Torsion - Axial Torsion Force Transducer

TQ7 Axial Torsion

Axial Torsion Force Transducer

The TQ7 is a force transducer capable of measuring both force in either tension or compression (Fz) while simultaneously measuring the moments around those forces (Mz). 

View product

TXY Two Axis - Dual Axis Load Cell

TXY Two Axis

Dual Axis Load Cell

 The TXY is a dual axis load cell built for simultaneous measurement of X and Y axis forces (radial forces at 90 degrees) with a very high degree of accuracy and repeatability while minimizing cross talk. Designed for tire balancing machines but also suitable for web tension type applications.

View product

Random Product

T12 Square Drive
T12 Square Drive
Square drive rotary torque transducer

The Interface T12 Rotary Torque transducer features a  square drive shaft from 1/4 inch to 1 1/2 inch, depending

View product Download our catalogue

Contact Us

T:
+44 (0)1344NoSkype 776666
F:
+44 (0)1344 774765
E:
info@interface.uk.com

Receive product updates, news and information.

This year is?