High Capacity

The 1000 Fatigue rated series is a long established favourite for aerospace & automotive test rigs where a high number of repetitive cycles are required over a period of time that can stretch to several years. The warranted life of Interface 1000 series Low Profile load cells is a minimum of 100 Million fully reversed cycles at full rated load. The manufacturing process of these units involves additional measures to reduce high stress points and routing of internal components through zero stress areas to ensure the longest possible lifespan under the most demanding test conditions.

• Fatigue Rated to 100 million fully reversed cycles
• Capacities from 450kN to 4.5MN (100klbf to 1Mlbf)
• High output to 2.0mV/V
• Moment compensated
• Performance to 0.03%

The 1200 Precision series is our standard Low Profile load cell and is a long established favourite of many users who require reliability and high performance under many high loading conditions. The design of the 1200 is inherently insensitive to off-axis loads and this is further enhanced by moment compensation that makes it ideal for applications with hydraulic, pneumatic or electric actuator loading systems. The 1200 and 1000 series products are in daily use in many aerospace and automotive test facilities throughout the world. The high calibre performance also makes the 1200 series the choice for calibration equipment and large numbers are in use as Proving Devices and Reference Standards in many calibration companies and laboratories.

• 6 Standard capacities from 900kN to 9MN, 200K lbf to 2,000 Klbf
• Accuracies to 0.07%FS
• Connector Protector(s) fitted to 1.2MN (270K) and above
• T&C Calibration in-house up to 1,000,000 lbf

The 2160 series column load cell is designed for high capacity applications in either metric or imperial capacities. Several options are offered with this device, such as multiple bridges and carry handles. Also available as the 2161 high capacity, compression only load cell

• Capacities from 300k lbf / 1335kN to 4.45mN
• Performance to +/- 0.15% Full Scale
• Metric and Imperial models
• 2161 Compression only model also available
• Optional ASTM E74 or ISO376 calibration

The 2300 Ultra High Capacity load cell is a brand new product offering from Interface. This is a low profile design load cell for those really big forces. Capacities range from a relatively modest 630kN to 2,000kN and with accuracy to 0.05%, this flange mount device is truly class leading.

• Low Profile Design
• High capacity, high accuracy
• Capacities from 630kN to 2,000kN
• Tension and Compression

The XSensor IX500:256.256.22 High-Resolution Tyre Pressure Mapping Sensor stands as the industry benchmark for ultra-precise tyre tread footprint analysis and dynamic vehicle safety testing. Engineered specifically for automotive manufacturers, premium tyre design laboratories, high-performance motorsport teams, and aerospace landing gear validation bays, this ultra-precise capacitive array captures tyre contact patches with unparalleled accuracy. This sensor allows engineers to accurately calculate and monitor exactly how a tyres footprint shifts under varying vehicle weights, environmental conditions, and inflation pressures.

Constructed using state-of-the-art Capacitive Pressure Imaging Technology mounted onto a rugged, heavy-duty backing layer, the IX500:256.256.22 is structurally optimized to survive continuous tyre compression loading without physical warping. Unlike traditional resistive sensor films that suffer from swift calibration decay, this high-pressure matrix provides exceptional long-term calibration stability, yielding highly repeatable measurements without requiring re-calibration between testing intervals.

The XSensor IX510:128.128.10 sensor is a flexible tyre sensor with a urethane cover for use in and away from the lab. The tough, bendable design enables this sensor to conform to irregular surfaces found outside the laboratory. This sensor is particularly suited to sub-soil tyre footprint pressure mapping applications

• Bendable designs conform to uneven surfaces
• 16,384 sensor points for high resolution images
• Faster data collection for low speed dynamic testing
• Quick and easy setup for use away the laboratory

The XSensor IX510:3.64.05 Flexible Tyre Bead Pressure Mapping Sensor is a highly specialized, pioneering tool designed to measure and map the exact interface forces between a tyre's bead and the wheel rim flange. Historically, capturing contact data within this tightly restricted, high-pressure boundary was nearly impossible without altering the true seating alignment of the tyre assembly. The IX510:3.64.05 solves this challenge, serving as a high-resolution, ultra-conformable sensor array capable of profiling real-time pressure distribution precisely across both the heel and toe of a tyre's bead line.

It is an essential asset for premium automotive manufacturers, motorsport racing groups, commercial aerospace landing gear design teams, and heavy-equipment wheel rim developers. The matrix is precision-calibrated to a high-capacity boundary of 512 PSI (35.3 bar). This tracking window allows tyre design and test engineers to isolate problematic load concentrations, detect bead seat unseating risks during extreme lateral cornering, evaluate rim seal integrity, and optimize initial tyre bead seating pressures.

The XSensor IX510:64.64.04 Stance Pad Pressure Mapping Sensor represents the pinnacle of high-resolution plantar pressure imaging and clinical gait analysis. Engineered specifically for biomechanics laboratories, human performance centres, and elite clinical environments, this thin, portable stance pad tracks the intricate dynamics of foot balance and gait symmetry. While conventional multi-point floor systems lack the grid density required to capture micro-level changes during quick movements, the IX510 matrix provides complete data integrity for both static standing postures and highly dynamic heel-strike impacts.

Constructed with a heavy-duty, protective top cover and an ultra-rigid backing layer, this durable pad withstands intense running trials, aggressive pivots, and high-frequency athletic testing without structural shift or calibration decay. Relying on state-of-the-art capacitive pressure imaging technology, the sensor delivers exceptional repeatability, virtually zero signal drift, and negligible hysteresis across prolonged use.

XSensor's Walkway and Runway Sensor is a high resolution pressure mapping sensor with 7,680 sensor points. Combined with XSensor's electronics and Pro V8 software the Walkway/Runway sensor provides lab-quality data for plantar pressure and gait evaluation studies The sensor features a large, 1.24 square meter active area and ultra low profile ensures there is no interference with natural gait measurement. The sensor is calibrated from 1 to 128psi (0.67 to 88N/m2) with a resolution of 0.01psi, ensuring data integrity for assessment, research and clinical studies. The Walkway sensor is designed for portability, fast set-up and is easily rolled up for transportation

• Easily Portable
• Up to 40 frames per second
• Does not interfere with natural gait
• Provides center of pressure, peak pressure data and more

The IX500:256.256.16 is a high resolution tire pressure mapping sensor offering accurate, detailed images in both 2D or 3D for tire profile and tread analysis or any surface you wish to measure. The larger active surface area is particularly suitable for the larger tires fitted to 4 x 4 SUVs, sports/racing cars and larger vehicles e.g. vans or trucks. The highly stable calibration which does not require re-calibrating every few measurements means this sensor offers the user fast, easy and accurate data collection. Used with XSensor's pro electronics and Pro V8.0 software, the IX510:256.256.22 sensor makes a powerful tool for gathering information about tire footprints, including land /sea ratios, the tire footprint changes with different inflation pressures and loads and more. The Pro V9.0 software has a full set of tools that enable the analysis and export of data in CSV, PNG and JPEG formats. If you require more information or are interested in an on site demo, please call us on 01344 776666, email info@interface.uk.com or use our on-line chat facility. We'll be pleased to help. If you require a smaller tire sensor please see the IX500:256.256.22 tire sensor Please note this sensor is normally supplied as part of a system

• High spatial resolution with 65,536 sensor points
• Highly detailed images with 1.6mm resolution
• Durable design offers accurate, repeatable measurements
• Pressure range from 10-300psi