Differential

The Model 115/215/315 from GP:50 is a family of compact, small form, high range differential pressure transducers. Series units are offered in ranges as low as 0 to 30 PSID (0 to 2 BAR D), with a line pressure range to 10K PSI (690 BAR). Their all-welded, corrosion-resistant, 316L stainless steel construction is without seals or o-rings, helping to ensure their continued reliability within demanding environments. Optional FM, CSA, ATEX intrinsic safety approvals are also available. Applications include: Pump and compressor skids

• Hydraulic test stands
• Drilling rig top drive controls

• Rugged, all welded construction
• Fully encapsulated electronics
• Leak proof, no o-ring design
• Base pressure to 10,000psi
• Optional ATEX, CSA, FM Intrinsically safe, explosion proof approvals

The 136/236/336 family is a range of differential pressure sensors that have been designed with high accuracy and robust performance in mind The 136/236/336 is capable of measuring differential pressure as low as 20 WCD with line pressure as high as 1,000PSID. This compact transducer is also offered with a accuracy options up to 0.05%FSO. There is also the choice of digital outputs and electrical connections, please contact us for details. Applications include:

• Transport and storage of LNG gas
• Automotive test stands
• Aircraft engine test stands
• Flow and filtration measurements
• Tank level
• Leak

Testing

• Compact design, high accuracy
• Fast response time
• Accuracy option to +/- 0.05%FSO
• Line pressure to 1,000PSI

GP50's 7450 is a high accuracy, aerospace grade, high line, low range differential pressure transducer. The 7450 is available with static line pressure as high as 5,000psi. Differential pressures from as low as 2.5"WCD and a 500psi proof pressure (6.9bar) is standard across all ranges. There is also a custom subsea version available, operational to 23,000ft (7010 meters) in sea water. Applications include: Ground support systems Ground and

• Engine tests

Launch vehicles Naval subsea testing

• Up to 5,000psi (345 bar) line pressure option
• Ranges of 2.5"WCD to 100psi (6.9 bar)
• +/- 0.1% FSO Accuracy
• True wet-wet design

The GP50 7540 is a differential pressure transducer designed for the harsh demands of subsea and other marine service environments. To ensure reliability and accuracy in a long service life the 7540 has been designed and built to demanding MIL and MIL spec standards. Applications include:

• Submarine
• Hydraulic systems -Submarine propulsion systems -Subsea wellhead pressure -BPO control

Systems

• Pressure ranges from 30 PSID to 7,500PSID (2 to 517 bar)
• Up to 10k PSI (689 bar) line and proof pressure
• Depths to 9,144 meters
• Compact, seawater rated design

The GP:50 Models 114, 214 & 314 Ultra-High Range Differential Pressure Transducers are designed for the tough and rigorous industrial environments where pressures up to 20,000psi are experienced. The X14 series is available with a choice of outputs with many options to meet you exact requirements

The series is divided into three distinct configurations to match your field electronics architecture: the Model 114 outputs a raw mV/V strain gauge path, the Model 214 provides high-level analogue voltage options (such as 0–5 VDC or 0–10 VDC), and the Model 314 variant operates on an industry-standard 4–20mA current loop to prevent data attenuation over long-distance cable runs.