Specialist & Custom

The 1600 Gold Standard series is a calibration grade Low Profile load cell that offers improved accuracy of performance and temperature characteristics. Additional gauges help improve the performance and the locked-in calibration adaptor removes uncertainty of thread engagement which with a stiff flexure could otherwise cause poor non-repeatability at lower applied forces. Every unit is supplied with a NIST traceable ASTM E74 or the option of a ISO376 calibration. Both calibrations include traceable 3-run calibration certificate that includes graphical plots and calculations of figures for polynomial fit equation. The calibration starts from just 4% of capacity.

• 0.005% non-repeatability
• 0.01% Creep
• High output - to 4mV/V
• 3 run NIST traceable ASTM E74 Calibration
• 4% lower load limit
• Optional ISO376 calibration
• Universal or Compression only options

The 1606 Gold Standard is a low capacity, tension and compression load cell designed to be used as a calibration reference unit to calibrate other load cells. It is supplied complete with factory, locked in calibration adaptor and ASTM E74, 3 run NIST traceable calibration certificate, equivalent to ISO 376.

• Capacities from 250N (50lbf) to 1500N (300lbf)
• Non-repeatability to 0.005%
• Creep 0.02%
• Eccentric load compensated
• Supplied with ASTM E74 calibration, equivalent to ISO 376

The 1800 Platinum Standard series is an enhanced calibration grade Low Profile load cell that offers improved accuracy of performance and temperature characteristics. Additional gauges help improve the performance for best resolution at all capacities. The load cell thread adaptor, male or female, is integral being machined from the same material blank as the load cell. The integral fitting removes any uncertainty of thread engagement which with a stiff flexure could otherwise cause poor non-repeatability at lower applied forces. The 1800 units are warranted to perform down to 2% of rated capacity per ASTM-E74 and every unit is supplied with a NIST traceable ASTM-E74 calibration certificate.

• Handcrafted to meet the most demanding requirements
• 0.005% non-repeatability
• ASTM E74 calibration standard
• Tension and Compression in one unit
• 2% lower limit
• Optional ISO376 calibration

The 2160 series column load cell is designed for high capacity applications in either metric or imperial capacities. Several options are offered with this device, such as multiple bridges and carry handles. Also available as the 2161 high capacity, compression only load cell

• Capacities from 300k lbf / 1335kN to 4.45mN
• Performance to +/- 0.15% Full Scale
• Metric and Imperial models
• 2161 Compression only model also available
• Optional ASTM E74 or ISO376 calibration

Here at Interface we have found that customers have an increasing requirement to perform on site calibrations of test equipment. The Interface 1600 Gold Standard, while an excellent calibration load cell is often considered too heavy for easy portability. We have therefore developed the new 2200 series to meet this need. Weighing between 35lb and 45lbs, the 2200 series is relatively light weight. Supplied with carrying handles, these load cells are easier to transport and position than equivalent Low Profile units. The 2200 series is available in 100K-lb and 200K-lb capacities with a performance of

• Capacities from 100k lbf
• ASTM E74 Calibration
• Quadruple the gauges of a standard column load cell

The 3200 series load cells are comparable in performance to the 1200 series Precision units but offer improved corrosion resistance and the option of hermetic sealing for use in outdoor environments. Every unit has a high signal output of 4mV/V for best resolution and performance.

• All Stainless steel construction
• Hermatically sealed
• Compact size
• High 4mV/V resolution
• Low deflection

The 3400 series is a range of load pins, low profile load cells and compression beam load cells that are specifically designed to be loop powered for use in hazardous environments such as oil or gas fields. The complete 3400 range is based on already successful Interface products but feature loop powered intrinsically safe amplified outputs. Shielded internal amplifiers are also used for extra low emissions and to minimize EMI susceptibility.

• Loop powered Load Pins, Beam Type & Low Profile load cells for hazardous enviroments
• All stainless steel construction
• IP65 and IP67 Environmental protection
• Internally amplified output to 4-20mA, loop powered
• Explosion protection, for use in hazardous environments

The Interface Model BPL Automotive Brake Pedal Load Cell is an ultra-low profile, lightweight force transducer engineered specifically to measure the direct forces applied to vehicle brake, clutch, and accelerator pedals. Designed to sit at the absolute core of automotive testing regimes, this highly specialised sensor provides vehicle development teams with precise, repeatable driver-effort data. It is widely specified across the UK for automotive passenger car development, motorsport race-car setup tuning, heavy-vehicle safety audits, braking system dynamometer testing, and flight simulator pedal force validation. 

Weighing as little as 140 to 180 grams depending on your chosen capacity, the Model BPL features an exceptionally low-mass design that ensures the sensor does not alter the natural mechanical inertia or true feel of the vehicle pedal assembly during aggressive track testing. The top surface incorporates an integrated, ergonomic rubber anti-slip pad to prevent foot slippage during extreme deceleration cycles.

The Interface PBLC1 & PBLC2 Pillow Block Load Bearing Load Cells are rugged, industrial-grade force sensors engineered specifically to monitor vertical load distribution beneath rolling element assemblies. Developed for continuous materials handling, steel processing mills, automated packaging machines, textile looms, and paper web tension lines, these unique load cells bolt directly beneath your machinery bearings to track dynamic force variations  

Manufactured from robust, galvanized tool steel with an IP65 environmental protection rating, the PBLC series is mechanically optimized for flawless drop-in integration alongside INA Pillow Block Bearings (bearings sold separately).

The WT, Web Tension load cell is a radial force sensor designed to measure the tension in webbing straps, aircraft cargo nets, conveyors belts or any application where tension measurement is important

• Dedicated Web Tension Load Cell
• Choice of 1kN or 2kN capacity
• IP63 Environmental Protection
• Full stainless Steel construction