Filter by sub-category
- Calibration Grade
- Column/Multi-Stack
- Electronics
- Fatigue Rated Load Cells
- Flange
- High Capacity
- In-Line Load Cells
- Low Profile/Donut
- Miniature
- Single Axis load cells
- Specialist & Custom
- Wireless & Digital
DMA2 Signal Conditioner
The DMA2 signal conditioner is a DIM rail mount signal conditioner that can convert the mV/V signal from any strain gauge load cell, reaction torque transducer or other strain gauge device to a user selectable +/-5vDC, +/-10vDC or 4.20mA output.
Learn more
DFI-05-U Universal Digital Indicator
The DFI-05-U is no longer available please refer to the DFi-05-L https://interfaceforce.co.uk/force-torque-and-pressure-measurement/dfi-05l-panel-mount-digital-indicator/ The DFI-05-U is the newest generation of our popular 1/8 DIN panel meter range and has been designed with a universal sensor input. It can be used for many measurement applications, including force, torque, pressure and temperature. The 32-bit A/D converter makes the DFI-05-U the fastest, highest performing, panel meter we have ever offered to date and our multi-sensor design makes it the most universal meter ever. The 6 digit, 7 segment, LED display is our own custom designed module and gives the user a choice of red, green or yellow digits. Also available with a bench top enclosure
Learn more
Pillow Block Load Cells
The Pillow Block load cells from Interface are designed to measure the forces of a Pillow Block load bearing with the force measurement being made between two two supports. The PBLC1 is designed for a 20mm dia Pillow Block bearing and the PBLC2 is designed for 80mm dia Pillow Block bearing. These load cells are compatible with INA Pillow Block Bearings Please note that the Pillow Block Bearing is not included.
Learn more
SSLP – Low Profile Load Cell
The Interface SSLP low profile load cell is a low cost, tension and compression load cell. Despite being offered at a competitive price, the SSLP is a fully stainless steel device with an IP67 environmental rating. The diaphragm design offers the high performance you'd expect from an Interface load cell with high natural frequency, low deflection and high resistance to off axis loads. The SSLP is offered with an integral cable as standard with the option of a base and load cap also constructed from stainless steel. Applications include :- Structural Testing, Jack Load Monitoring, Airframe Testing, Material Test Machine Feedback, Fatigue Testing Rigs.
Learn more
Super SC Mini Load Cell
The Super SC load cell from Interface is a small form factor S-Beam design load cell. It is designed to a general purpose, compact load cell but with the high performance you would expect from an Interface device. It's eviromentally sealed design is designed to offer superior resitance to off axis loads when compared to a conventional S-Beam design. Please register or login to download our White paper for more information.
Learn more
Interface LWHP14 Load Washer
The LWHP14 is a precision load washer type load cell. It is ideal for compression only, bolt force or clamping force applications or any application where two peices are being pressed together. It features a all stainless steel construction and is available in capacities from 0.05kN to 100kN The LWHP14 features in our energy/electrolyzer-and-fuel-cell-tie-rod-monitoring application note
Learn more
CTLB Tension/Compression Load Button
Model CTLB is a threaded load button for tension and compression load measurements up to 5000kg/ 10000lb. Fully welded cover (for SS load buttons), amplified and digitised versions are available on request. We can also customise this sensor for other thread sizes and cable sizes
Learn more
ConvexBT – LBSU Load Button
The ConvexBT / LBSU load button has been designed by the experienced engineers at Interface to meet the demands of high precision testing in confined spaces. The requirements for the ConvexBT included high quality, accuracy and most of all reliability The design of the ConvexBT is revolutionary. It's a first of its kind load button load cell, that offers improved temperature resistance and enhanced eccentric load rejection. Miniature load cells categorized as load buttons have, in the past been sensitive to off-axis, eccentric or misaligned loads. This means if the load is not exactly perpendicular to the surface it is resting on, the data could become skewed or inaccurate. Interface designed the ConvexBT™ Load Button Load Cell to confine misaligned loads to the primary axis of the cell providing superior performance in comparison to similar products on the market in repeatability, better data and reproducible results.
Learn more
G-Series In-line Load Cells
The GWMC miniature in-line load cell is part of the Interface G-Series product range for industrial and OEM users and applications. The GWMC is a tension and compression mini load cell with male, threaded studs top and bottom that can be placed in the load stream. It comes in a range of capacities from just 200 Newtons to 50 Kilo-Newtons and promises the highest quality with a competitive price point, as per all of Interface's G-Series products. Buy now at our on line store
Learn more
G-Series Mini Load Cell
The GSMTM sub-miniature S-type overload protected load cell is part of Interface's G-Series aimed at industrial and OEM users and applications. The GSMTM is a tension and compression mini load cell offered in a range of capacities from just 4.5 Newtons to 445 Newtons. G-Series products are competitive in price yet far ahead of competing brands in quality and performance standards. Buy now at our online store!
Learn more
Compact Low-Profile – CLP Load Cell
Compact Low-Profile load cells are fully stainless steel, hermetically sealed load cells with a multi-beam internal structure, and fully integrated electronics to provide high level analogue or digital outputs. This type of load cell is easy to use for measuring tension or compression loads from 200N to 50kN, and is capable of rejecting side forces that would otherwise affect accuracy. This type also offers the user the ability to set the gain and offset (span and zero) electrically, to provide maximum flexibility for the user application.
Learn more
RC3 Rocker Load Cell
Compact and yet very robust the RC3 is available in a very wide range of capacities from 7.5t through to 300t. The rocker column design ensures that the optimum weighing accuracy is achieved when subjected to scale deck movement. IP68 rated, fully hermetically sealed and constructed from stainless steel the RC3, offers an economical solution. Applications include Truck scales, railroad scales, high capacity scales, silo weighing systems.
Learn more
WT – Web Tension Load Cell
The WT, Web Tension load cell is a radial force sensor designed to measure the tension in webbing straps, aircraft cargo nets, conveyors belts or any application where tension measurement is important
Learn more
9840-400 4 Channel Intelligent Indicator
Introducing the new 9840-400-1-T Intelligent Indicator. It features a more modern digital display with additional channels available. It’s now easier to use, with the same high stability and industry-leading performance as the older version of the 9840. Although the quality is the same as our older version, the update can be easily integrated with Interface’s Gold Standard® system and frames, as well as with Microsoft’s Windows® 10.
Learn more
WMC Rod End
The WMC Rod End Load Cell features an all stainless steel construction, low deflection and capacities from grams to thousands of pounds force means the WMC range is used in a wide variety of industrial applications, from aerospace to pharmaceutical. These are considered by many as the force measuring standard when high performance, reliability and accuracy are required.
Learn more
LWPF2 Press Force Load Washer
The LWPF2 is a high accuracy; high performance load washer designed for the monitoring of press forces. The low height and large diameter through hole make it easy and convenient for location in many different types of press machines.
Learn more
LWPF1 Press Force Load Washer
The LWPF1 is a high accuracy; high performance load washer designed for the monitoring of press forces. The low height and large diameter through hole make it easy and convenient for location in many different types of press machines.
Learn more
LWCF Clamping Force Load Cell
The Interface LWCF is has been designed to help you measure the tightening or clamping force for bolts or other fastenings. The design of the LWCF is a robust, full stainless steel, low height which is able to be used in a wide range of capacities; To accommodate a wide range of bolt sizes from M6 up to M52.
Learn more
LW Load Washer
Normally used for measuring tension on bolts or fasteners, the Interface LW load washer is available in capacities from 5lbf to 200klbf (20N to 44.5kN). There is also a wide combination of internal, external and height dimension combinations available to best match your application.
Learn more
BPL Brake Pedal Load Cell
The BPL Pedal Load Cell is an ultra-low profile load cell for use with brake, clutch and accelerator (gas) pedals or any foot pedal where force measurement is required. This device offers the lowest hysteresis and non-linearity of any product of this type available.
Learn more
6A 6-Axis Load Cell
The Interface 6A series of load cells feature six independent, temperature compensated bridges providing mV/V output to six independent channels. This enables measurement in three perpendicular axis simultaneously with three torque measurements about those axis. The 6A series is available in 10+ different sizes to meet you requirements, most with IP67 environmental sealing. Typical applications include: Orthopedic and biomechanical research, Robotics, Aerospace research, Automotive testing, Wind tunnel model tests. IP68, submersible versions for wave tank or other submersible applications are available on request If you require a 6A175, 6A225 or 6A300, please contact us to discuss your requirements
Learn more
5600 Axial Torsion
The Interface 5600 is a flange mount axial torsion device for simultaneous measurement of force and torque (Fz & Mz).
Learn more
3 Axis Load Cell
The Interface 3A, 3-axis load cell measures force simultaneously in three mutually perpendicular axes: X, Y and Z. This makes it ideal for many industrial and scientific applications, such as robotics, aerospace, automotive, bio-mechanical and medical research. Each axis supplies an output of 1mV/V and does not require mathematical manipulation. The 3A load cell is built to minimize eccentric loading and cross talk between channels. The 3A is available in a wide range of capacities from just 20N and in five different physical sizes. However, if the standard range does not meet your needs we are happy to work with you on a custom design. If you require a 3A300 or 3A400, large capacity 3-axis load cell, please contact us to discuss your requirements
Learn more
1216 Axial-Torsion
The 1216 Axial-Torsion load cell measure both force and torsion in the same cell - with either channel capable of being used independently, each channel offers excellent performance and minimal crosstalk.
Learn more
WMCP Male Mini Load Cell
The WMCP male mini load cell with male fittings from Interface features an all stainless steel construction, low deflection and capacities from grams to thousands of pounds force. WMC range is used in a wide variety of industrial applications, from aerospace to pharmaceutical. These are considered by many as the force measuring standard when high performance, reliability and accuracy are required.
Learn more
WMCFP Female Mini Load Cell
The WMCFP, female mini load cell features all stainless steel construction, low deflection and capacities from grams to thousands of pounds force. This means the WMC range is used in a wide variety of industrial applications, from aerospace to pharmaceutical. These are considered by many as the force measuring standard when high performance, reliability and accuracy are required.
Learn more
WMC 2 Mini Load Cell
The WMC serves in applications in industries as disparate as Aerospace and pharmaceutical. The stainless steel, sealed load cell is used where ever high accuracy and high performance is required.
Learn more
WMC 1 Mini Sealed Load Cell
The WMC 1 Mini Sealed Load Cell serves in applications in industries as disparate as Aerospace and Pharmaceutical. This stainless steel, sealed load cell is used where ever high accuracy and high performance is required.
Learn more
SSM-FDH Hi Temp S-Beam
The SSM-FDH offers the same high performance in both tension and compression as our popular series of SSM environmentally sealed S-Beam load cells. As an additional benefit, the SSM-ARS features proprietary Interface temperature compensated strain gauges for use in high temperature environments.
Learn more
SSMF Fatigue Rated
The Interface SSMF is a fatigue rate environmentally sealed S-Beam load cell. Fatigue rated to 1 x10-7 fully reversed cycles, it also features proprietary, temperature compensated Interface strain gauges for best possible performance.
Learn more
SSB Sealed Beam Load Cell
The SSB Sealed Beam Load Cell offers all the performance and benefits of the MB beam load cells but with the advantage of being environmentally sealed. The compact size combined with excellent performance has made these an extremely popular choice for Wind Tunnel applications where they help considerably to keep the overall size of 3 or 6-axis Force Balances to a minimum while offering a useful force range.
Learn more
SPI 2 Platform Scale
The SPI range of load cells have been designed for use in scales, so has compensation built in for off center loads.
Learn more
SPI 1 Platform Scale
The SPI range of load cells have been designed for use in scales, so has compensation built in for off center loads.
Learn more
SMTM Micro Load Cell
The SMTM is a micro sized S-Beam load cell for applications where size is a real issue. This universal load cell is available with both imperial or metric calibrations and mounting threads. This micro load cell also features overload protection up to 1000 times capacity
Learn more
SMA Mini S-Beam Load Cell
The SMA mini load cell is a miniature version of the SM/SSM which can be used when space is restricted. With 35mm(H) x 35mm (W) x 14.2mm (D) dimensions this device can still offer rated capacities up to 900N while retaining excellent non-linearity and hysteresis performance of +/-0.05% (worst case).
Learn more
MSC High capacity
The MSC is a high capacity, small diameter load button for use where high capacity is required but space is at a premium.
Learn more
MBP Mini Beam Load Cell
The Interface MBP overload protected miniature beam load cell is a high performance device used in a wide variety of low capacity, high accuracy applications, such as medical test machines where reliability is a key factor.
Learn more
MBI Fatigue Mini Beam
The MBI miniature beam load cell is similar to the standard MBP range but with the added benefit of being fatigue rated to offer better resistance to off centre loads.
Learn more
MB Mini Load Beam load cell
The Interface MB miniature beam load cell is a high performance beam style device used in a variety of low capacity applications, such as medical test machines.
Learn more
LBS Mini Load Button
The Interface LBS load button is ideal when your application means that space is at a real premium. At just 0.12 inches tall, the LBS will fit in the smallest spaces.
Learn more
LBMU Compression Load Button
The LBMU is a compression load button with full stainless steel construction that offers superior accuracy and performance. The LBMU's superior performance is due to its unique contoured flexure profile, enhanced flexure stiffness and special multi grid gauges. These offer a 100% improvement in non-linearity, hysteresis and non-repeatability.
Learn more
LBM Load Button
The Interface LBM Compression load button is ideal when your application means that space is at a real premium. It features a small diameter, environmentally sealed design that ensures accurate force measurement.
Learn more
SGA Signal Conditioner
The SGA-A is a high-performance strain gauge signal conditioning amplifier that’s idea for use with load cells, force, pressure and torque sensors. The SGA-A is versatile amplifier that can provide excitation voltage to up to four transducers from a single channel. Output signal can be selected from 0-20mA, 4-20mA, 0-10V, 0-5V, ±5 V or ±10 V. The SGA is supplied in a IP67 environmentally sealed case, making it suitable for use away from the workshop or laboratory.
Learn more
ITA-1 In-Line Amplifier
The ITA-1 (known in this office as the Click-R Clack-R) is an analogue strain gauge amplifier that connects to your sensor in line via a 5-pin, M12 connector. It’s used to convert the millivolt signal from your sensor into an analogue signal for your display or DAQ. The ITA-1 can be connected to any force, strain, torque or pressure sensor that supplies a millivolt output signal. Output can be either voltage or current. The ITA-1 can be factory configured when supplied with an Interface load cell or torque transducer, but set up can be modified by the user using the tare and scale cables.
Learn more
INF-USB3 Signal Amp
The INF-USB3 provides an easy interface for collecting data from an Interface transducer directly into your computer. This device makes any Interface load cell or torque transducer USB compatible. The INF-USB is supplied with Windows compatible software to enable immediate collection, evaluation and recording of data with the ability to export data in csv file formats. Features include Easy USB connection to computer from Load and Torque Transducers Transducer data logged into MS Excel compatible CSV file format Fast 5000 Hz Sample rate Graphing and Logging software included 16-bit resolution Shunt Cal trigger via software Works with mV/V, ±5V DC and 4-20mA output transducers Environmentally sealed to IP67
Learn more
1200WTS Wireless Load Cell
The 1200WTS is the wireless version of the Interface 1200 Precision series, our most popular load cell. This means it features the same high accuracy, performance and dependability, but with the advantage of wireless telemetry. The 1200WTS is fully compatible with the innovative Interface WTS Telemetry system, giving you the choice of hand-held, digital USB or analogue receivers. The 1200WTS can be supplied with full factory set up when purchased with the WTS Wireless Telemetry system.
Learn more
5200 Multi-Axis
The 5200 multi axis load cell is built on the 1200 series Precision design. However, the 5200 has additional outputs for X & Y Moments making it possible to monitor off-axis loads for information about alignment accuracy. The standard 'thrust' output has the accuracy and performance of the 1200 series units making this unit very suitable for calibration applications. New European proposals have been suggested to introduce off-axis load monitoring into current Standards such as ISO-7500/1 and ISO-376.
Learn more
3200 Stainless Steel Standard
The 3200 series load cells are comparable in performance to the 1200 series Precision units but offer improved corrosion resistance and the option of hermetic sealing for use in outdoor environments. Every unit has a high signal output of 4mV/V for best resolution and performance.
Learn more
2400 Stainless Steel
The 2400 Stainless Steel series is designed to suit many industrial applications. The hermetically sealed stainless steel units have small size flexures with standard threads and mounting bolt dimensions to offer compatibility with many existing installations. Capacities from 100lbf (450N) to 300Klbf (1.35MN) and above are available and options include integral electronic amplifiers for signal conditioning.
Learn more
1700 Flange Series Load Cell
The 1700 series is a compact range of load cells designed for maximum flexibility of coupling to actuators. The attachment of load fixings can use either the central threaded fixing or the flange type ring and both methods have the advantage of alignment surfaces to ensure concentricity. The small physical size permits operation in applications where space is restricted and as can be expected from Interface products the performance is excellent.
Learn more
1500 Low Capacity Load Cell
The 1500 Low capacity load cell has a cruciform design that is inherently insensitive to off-axis loads and this is further enhanced on each unit by moment compensation during manufacture. The design provides similar performance to the Low Profile style but at significantly lower capacities as low as 125N (25lbf).
Learn more
1331 Compression Only
The 1331 is a small footprint compression only load cell. This load cell offers a high 4 mV/V output via proprietary Interface temperature compensated strain gauges. Load application is via an integral load button.
Learn more
1200 Precision Series
The 1200 Precision series is a low profile load cell, favoured among users for its reliability and high performance under diverse loading conditions. Designed to be insensitive to off-axis loads and featuring moment compensation during manufacture, the 1200 Precision series is ideal for applications with hydraulic, pneumatic or electric actuator loading systems. Used in aerospace and automotive test facilities across the globe, the 1200 Precision delivers high calibre performance in high-stakes applications.
Learn more
Interface 1200 Flange Series Load Cells
The 1200 series Flange load cells build upon the performance of the 1200 series Precision and 1000 series Fatigue units with the introduction of a flange style mounting for loading fixtures. The flange style coupling permits easy attachment directly to acutator rods without the tightening issues associated with single large thread arrangements. Alternatively custom attachments can be used where large rod-end bearings are required to reduce the height of load strings.
Learn more
1101 Ultra Precision, Compression
The 1100 Ultra-Precision series is an enhanced version of our standard Low Profile load cell to provide the extra warranted performance required for more demanding applications. The 1100 is supplied with a fitted base to remove any uncertainties regarding mounting arrangements and to guarantee the performance under normal working conditions.
Learn more
1100 Ultra Precision Load Cells
The 1100 Ultra-Precision series is an enhanced version of our standard Low Profile load cell to provide the extra warranted performance required for more demanding applications. The 1100 is supplied with a fitted base to remove any uncertainties regarding mounting arrangements and to guarantee the performance under normal working conditions. The 1100 series is an ISO376 capable device and can be used as a calibration load cell with the addition of an optional calibration adaptor.
Learn more
1000 Fatigue Series
The Interface 1000 Fatigue rated series is a long established favorite for aerospace & automotive test rigs where a high number of repetitive cycles are required over a period of time that can stretch to several years. The warranted life of Interface 1000 series Low Profile load cells is a minimum of 100 Million fully reversed cycles at full rated load. The manufacturing process of these units involves additional measures to reduce high stress points and routing of internal components through zero stress areas to ensure the longest possible lifespan under the most demanding test conditions.
Learn more
AS600 mV/V Transducer Simulator
The AS600 Transducer mV/V Simulator is a passive device designed for calibration of digital indicators up to high accuracy calibration grade devices and the setup of no-display signal conditioning electronics. The AS600 also provides a convenient solution to the problems of commissioning, calibration and fault isolation in strain gauge bridge transducer systems. The AS600 simulates any type of strain gauge bridge transducer including load cells, pressure transducers, extensometers. The dual attenuator network gives a symmetrical output simulating a full active strain gauge bridge. It is mounted in a die-cast box providing durability in either laboratory or field environments.
Learn more
9840 Digital Intelligent Indicator
The Interface 9840 Digital Indicator is an intelligent calibration grade display which can be used in laboratory, field service environments or anywhere where a highly accurate indicator is required. The 9840 comes fully loaded with a host of features to make it one of the best indicators available anywhere. The 9840 is available in single or dual channel options with USB comms as standard. It's also TEDs ready and has auto setup for multiple load cells.
Learn more
2200 Calibration Column
Here at Interface we have found that customers have an increasing requirement to perform on site calibrations of test equipment. The Interface 1600 Gold Standard, while an excellent calibration load cell is often considered too heavy for easy portability. We have therefore developed the new 2200 series to meet this need. Weighing between 35lb and 45lbs, the 2200 series is relatively light weight. Supplied with carrying handles, these load cells are easier to transport and position than equivalent Low Profile units. The 2200 series is available in 100K-lb and 200K-lb capacities with a performance of <0.10% full scale ensuring the highest levels of accuracy. Each load cell is supplied with an ASTM E74 calibration with ISO-376 available if required.
Learn more
1800 Platinum Series Load Cell
The 1800 Platinum Standard series is an enhanced calibration grade Low Profile load cell that offers improved accuracy of performance and temperature characteristics. Additional gauges help improve the performance for best resolution at all capacities. The load cell thread adaptor, male or female, is integral being machined from the same material blank as the load cell. The integral fitting removes any uncertainty of thread engagement which with a stiff flexure could otherwise cause poor non-repeatability at lower applied forces. The 1800 units are warranted to perform down to 2% of rated capacity per ASTM-E74 and every unit is supplied with a NIST traceable ASTM-E74 calibration certificate.
Learn more
1606 Gold Standard Calibration Load Cell
The 1606 Gold Standard is a low capacity, tension and compression load cell designed to be used as a calibration reference unit to calibrate other load cells. It is supplied complete with factory, locked in calibration adaptor and ASTM E74, 3 run NIST traceable calibration certificate, equivalent to ISO 376.
Learn more
1600 Gold Standard Calibration Load Cell
The 1600 Gold Standard series is a calibration grade Low Profile load cell that offers improved accuracy of performance and temperature characteristics. Additional gauges help improve the performance and the locked-in calibration adaptor removes uncertainty of thread engagement which with a stiff flexure could otherwise cause poor non-repeatability at lower applied forces. Every unit is supplied with a NIST traceable ASTM E74 or the option of a ISO376 calibration. Both calibrations include traceable 3-run calibration certificate that includes graphical plots and calculations of figures for polynomial fit equation. The calibration starts from just 4% of capacity.
Learn more
Model 480 Weighing Indicator
The Interface 480 Digital Weighing Indicator model 480 is a single channel, general purpose indicator designed for process weighing applications in a range of environmental conditions. It features a large, easy read (20mm) six digit LED display and control panel. The 100,000 count display offers high accuracy coupled with a 7 button control panel that offers simple and swift set up and control. The full stainless steel NEMA 4 (IP66) rated housing protects the display from water ingress and is very easy to clean down.
Learn more
GL240 Data Logger
The Graphtec GL240 is a midi size, multi function data logger with ten isolated multi-function input channels with up 10ms sampling rate. This data logger can be used to measure voltage, humidity, temperature, pulse or logic. The 4.3” colour TFT LCD display makes it easy to read data in digital form or wave form and to check your measurement parameter settings. The GL240 also has 4GB built in flash memory to enable long term data measurement without the need for an external storage device. GL240 also has a hot swappable SD card slot for external memory, supporting up to 32GB. The GL240 can be powered via either AC or DC power supply or via an optional re-chargeable battery pack.
Learn more
DIG-USB Output Module
The DIG-USB is a compact, high performance mV load cell and torque transducer signal converter which digitizes a load cell's analogue output to your PC via a USB port. Connecting the DIG-USB to your PC means that data can be exported from your strain gauge device without the need for amplifiers, filters or other devices. The DIG-USB also provides excitation voltage for your device, eliminating the need for any external power. The Windows compatible software enables real time data viewing, data logging, manipulation and setup. The DIG-USB can be supplied in the IP50 rated ABS enclosure or as a OEM PCB module.
Learn more
DFI-05L Digital Indicator
The DFI-05-L is a panel mount digital indicator designed for use with load cells in either weighing, torque or force measurement applications. Its dual slope 16 bit ADC performs 10 conversions each second with a resolution of 1 part in 63,000 and a maximum sensitivity of 1µV. Load cells can be wired in either 4 or 6 wire configuration and up to 4x 350R units can be connected to each indicator for platform or vessel weight displays. Standard features include Adjustable Filters, Automatic Zero Drift Compensation, Peak and Valley Detection, Display Filter, Last Digit Roundup, In-flight compensation and multiple point calibration with the Lineariser feature (maximum 10 points). The DFI-05-L is also avilable in an option desktop enclosure
Learn more
DFI-02 6 Digit Display
NO LONGER AVAILABLE - please see the 9840 https://interfaceforce.co.uk/force-torque-and-pressure-measurement/9840-intelligent-indicator/ The DFI-02 is based on the highly successful DFI-01 and is designed specifically for use in mobile or desktop instrument applications where high accuracy force or weight indication is required. The updated design includes a 24-bit ADC with high stability electronics and the firmware incorporates many new features to make this ideal for ISO-7500/1 calibration systems. The units small physical size and its tilt leg/carry handle offers ease of viewing and portability. Front panel keys or Remote RS232 offers instant access to Tare, Set Zero, Print, Test (10 display) & Mode (Gross/Net/Peak) with full calibration and set up facilities. The detailed menu driven procedure can be password protected with two access levels to prevent inadvertent changes to calibration or set-up information.
Learn more
9860 Panel Mount Display
The 9860 is a high bandwidth panel mounted digital display. The 9860 offers direct analogue output by by-passing the A/D converter to offer 1000Hz bandwidth. The 9860 also offers built- in, automatic self calibration for any load cell with a TEDS chip. The 9860 display is now out of production with very limted stock. Please contact us for avilability
Learn more
9850 Indicator
The 9850 is a digital display for rotary torque transducers. It features a modular design that allows the use of 7 different types of input channel cards in 2 available slots. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd maths channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Includes software for graphical data display and logging.
Learn more
9330 Portable Data Logger
The 9330 is a portable digital display and data logger capable of a 3750 Hz update rate at 24 bit resolution. Data can be saved to SD card at 1000Hz and can be exported to a PC via USB with Windows compatible software. The 9330 can power up to 4 x350 ohm sensors with the calibration files of up to six being stored. The rechargeable battery offers a 300 hour stand by time with up to 20 hours continuous use. The 9330 is a true, portable, high speed data logger and display for force transducers, load cells and torque transducers. Purchase the 9330 now at our online store
Learn more
9320 Hand Held Indicator
The 9320 has been replaced by the 9325. Please visit the page for the 9325 for more information https://interfaceforce.co.uk/force-torque-and-pressure-measurement/handheld-digital-indicator/
Learn more
SSMH S-Beam ATEX Approved
SSMH offers the same high performance in both tension and compression as our popular series of SSM environmentally sealed S-Beam load cells. As an additional benefit, the SSMH is ATEX approved for use in hazardous environments where potential ignition sources are prohibited.
Learn more
3400 Series
The 3400 series is a range of load pins, low profile load cells and compression beam load cells that are specifically designed to be loop powered for use in hazardous environments such as oil or gas fields. The complete 3400 range is based on already successful Interface products but feature loop powered intrinsically safe amplified outputs. Shielded internal amplifiers are also used for extra low emissions and to minimize EMI susceptibility.
Learn more
2300 Ultra Hi Capacity
The 2300 Ultra High Capacity load cell is a brand new product offering from Interface. This is a low profile design load cell for those really big forces. Capacities range from a relatively modest 630kN to 2,000kN and with accuracy to ±0.05%, this flange mount device is truly class leading.
Learn more
2160 Column Hi Capacity
The 2160 series column load cell is designed for high capacity applications in either metric or imperial capacities. Several options are offered with this device, such as multiple bridges and carry handles. Also available as the 2161 high capacity, compression only load cell
Learn more
1000 Fatigue Hi-Capacity
The 1000 Fatigue rated series is a long established favourite for aerospace & automotive test rigs where a high number of repetitive cycles are required over a period of time that can stretch to several years. The warranted life of Interface 1000 series Low Profile load cells is a minimum of 100 Million fully reversed cycles at full rated load. The manufacturing process of these units involves additional measures to reduce high stress points and routing of internal components through zero stress areas to ensure the longest possible lifespan under the most demanding test conditions.
Learn more
1200 Precision Hi-Capacity
The 1200 Precision series is our standard Low Profile load cell and is a long established favourite of many users who require reliability and high performance under many high loading conditions. The design of the 1200 is inherently insensitive to off-axis loads and this is further enhanced by moment compensation that makes it ideal for applications with hydraulic, pneumatic or electric actuator loading systems. The 1200 and 1000 series products are in daily use in many aerospace and automotive test facilities throughout the world. The high calibre performance also makes the 1200 series the choice for calibration equipment and large numbers are in use as Proving Devices and Reference Standards in many calibration companies and laboratories.
Learn more
SML Low Height
Interface SML is a low height, high accuracy load cell for applications where height may or space be restricted, but repeatable, accurate measurements are still required in tenstion or compression
Learn more
SMT Overload Protected
The SMT overload protected load cell is ideal for low capacity application where accidental overload is difficult to avoid. The internal mechanical protection offers overload protection to 10 X capacity.
Learn more
ULC – Ultra Low Capacity
Introducing the ULC, with capacities as low 0.5N (50grams), this is the world’s most accurate ultra low capacity load cell. The unit has excellent overload protection in both tension and compression and is designed to withstand large off-axis loads.
Learn more
SSM/SSM2 Sealed S-Beam Load Cell
The Interface SSM and SSM2 series are a low cost, sealed, tension and compression S- beam style load cell. They designed to offer the highest possible performance and accuracy in test machine and other general purpose applications with the advantage of being sealed against moisture ingress.
Learn more
SM S-Type Load Cell
The Interface SM is a low cost, tension and compression S- beam style load cell. It is designed to offer the highest possible performance and accuracy in test machine and other general purpose applications.
Learn more